{"product_id":"greensmaster-3150-q","title":"Greensmaster® 3150-Q","description":"\u003cp\u003eThe Greensmaster 3150-Q is distinguished for its field-proven performance and exceptional quality of cut. Equipped with patented DPA cutting units for a superior cut and minimal maintenance, convenient controls for easy operation, and ample power to handle any application–it’s no wonder this classic model has been trusted over the years to deliver the performance golf courses demand with a putting surface that exceeds expectations.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eArmrests:\u003c\/strong\u003e Optional\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eBattery:\u003c\/strong\u003e 12V\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eBedknife:\u003c\/strong\u003e Replaceable single-edged EdgeMax™ Microcut Bedknife is standard.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eBedknife Adjustment:\u003c\/strong\u003e Dual screw, indexed “click” adjustment to the reel; detents corresponding to 0.0007″ (0.018 mm) bedknife movement for each position.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eBlade Style\/Type:\u003c\/strong\u003e Reel\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eBlade Type (Description):\u003c\/strong\u003e Reels are 5″ (13 cm) in diameter, 21″ (53.3 cm) in length. EdgeSeries™ Reels blades are welded to 5 stamped steel spiders, and heat treated. The reel is ground for diameter and concentricity, and relief ground. The reel weldment shaft is a 1.375″ (35 mm) diameter tube with internally splined threaded insert. Two stainless steel ball bearings (30 mm inside diameter) slip fit onto reel shaft retained by internally splined threaded insert. Low drag seals\/slingers for added protection with o-ring sealed motor and counterweight. Reel position maintained by a wave washer with no adjusting nut.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eClip Frequency\/Backlapping:\u003c\/strong\u003e Adjustable up to 1975 RPM at 2850 engine RPM. Backlapping standard.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eControls:\u003c\/strong\u003e Raise\/lower-mow lever (joystick). Functional control lever (neutral, mow, transport). Foot operated traction drive and brakes. Hand operated throttle and choke. Mechanical engine speed control.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCup Holder:\u003c\/strong\u003e Standard\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCutting Unit Accessories:\u003c\/strong\u003e 8, 11, 14-Blade Cutting Unit, Roller Options, Groomer Options, Scraper Options, Bedknife and Bedbar Options, Thatching Reel Accessories, Tools and Maintenance Options.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCutting Unit Type\/Configuration:\u003c\/strong\u003e Cutting units are completely free-floating, each attaching to the tractor by direct pull links and lifted by a centered lift arm. Baskets are supported by carrier frames that are ground following. Cutting unit floatation is unaffected by basket content. Grass baskets are all interchangeable and accessible from the front of the machine. Double A-Arm Suspension utilizing sealed ball joints allows free cutting unit motion in pitch and yaw. Links system for the roll. The basket is directly mounted to the cutting unit displacing weight evenly over front and rear rollers. (patented)\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDrivetrain:\u003c\/strong\u003e Gas\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eElectrical System:\u003c\/strong\u003e 12-volt lead acid, group size U1, with 300 minimum CCA at 0° F. 16 amp alternator. Seat switch. Harness terminals and fuse slot available for optional lights installation.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eEngine Cooling:\u003c\/strong\u003e Air Cooled\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFuel \/ Power Source:\u003c\/strong\u003e Gasoline\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFuel Capacity:\u003c\/strong\u003e 7 U.S. gal. (26.5 L)\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eGauges\/Instrumentation:\u003c\/strong\u003e Hour Meter\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eGrass Distribution:\u003c\/strong\u003e Non-adjustable front shield with adjustable cut-off bar to improve grass discharge from reel in wet conditions.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eGround Pressure:\u003c\/strong\u003e 8-12 psi (.55-.83 bar) (dependent on tire pressure) with operator and cutting units down.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eGround Speed – Forward:\u003c\/strong\u003e 0 – 10 mph (0 – 16.1 km\/h)\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eHeight:\u003c\/strong\u003e 74.5″ (189 cm)\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eHeight of Cut Range:\u003c\/strong\u003e Cutting height is adjusted on front roller by two vertical screws and held by two locking cap screws. Bench HOC range is 0.062″ – 0.297″ (1.6 – 7.5 mm). With high HOC kit, range is 0.297″ – 1.0″ (7.5 – 25.4 mm). Effective HOC may vary depending on turf conditions and bedknife installed.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eHydraulic Fluid Capacity:\u003c\/strong\u003e 7.5 U.S. gal. (28.4 L) tank with internal baffle. 1 U.S. gal. (3.8 L) auxiliary tank.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eImplement Drive:\u003c\/strong\u003e Single gear pump, mono valve block, series reel drive to 3 motors.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eLeak Detection:\u003c\/strong\u003e Standard Turf Guardian™ Leak Detection System. System sounds an alarm and turns on a warning light with the loss of 3-5 oz. of hydraulic fluid.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eLighting:\u003c\/strong\u003e Optional\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eMowing Speed:\u003c\/strong\u003e 2 – 5 mph (3.2 – 8 km\/h)\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNumber of Blades:\u003c\/strong\u003e 11, 14, 8\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eOptional Accessories:\u003c\/strong\u003e 3-Wheel Drive Kit, Thatching Reel (Set of 1), Traction Tire – 18″ (45.7 cm), Traction Tire – 20″ (50.8 cm), Light Kit, Rear Work Light Kit, Hydraulic Oil Cooler Kit, Traction Speed Control Kit, Spark Arrestor Screen, Bimini Folding Shade, 2WD Weight Kit, 3WD Weight Kit, Utility Bag Kit, Seat Cover, RH Armrest, LH Armrest, Armrest Kit, Wireless Hour Meter\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eOverall Width:\u003c\/strong\u003e 69.7″ (177 cm) with reels\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eParking\/Service Brakes:\u003c\/strong\u003e Foot activated with two 6″ (15.2 cm) drum type brakes mounted on the front wheel motors.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003ePower Steering:\u003c\/strong\u003e Yes\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003ePower Train (Engine Description):\u003c\/strong\u003e Briggs and Stratton® air-cooled gasoline engine, 18 hp (13.4 kW) @ 3600 rpm, governed to 2850 rpm high idle, 1650 rpm low idle.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eProduct Length:\u003c\/strong\u003e 90″ (229 cm)\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReel Diameter:\u003c\/strong\u003e 5 in. (12.7cm)\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReel\/Cylinder Drive:\u003c\/strong\u003e Hydraulic\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eRollers:\u003c\/strong\u003e Front: Not included with cutting unit, purchased separately. Option between full, narrow-spaced and wide-spaced Wiehle roller.\u003c\/p\u003e \u003cp\u003eRear: Steel full, 2″ (5.1 cm) diameter with sealed bearings and through-shaft.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSafety\/Operator Safety:\u003c\/strong\u003e Roll Over Protection System standard. Sound level of 82 dB(A) at operator’s ear under normal conditions.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eStarting:\u003c\/strong\u003e Electric\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSteering System Description:\u003c\/strong\u003e Adjustable steering wheel tilt and a 5-position steering arm tilt.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eTires – Front:\u003c\/strong\u003e 18″ x 10.5″ – 8″, 4-ply, Smooth Tread\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eTires – Rear:\u003c\/strong\u003e 18″ x 10.5″ – 8″, 4-ply, Smooth Tread\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eTraction Drive:\u003c\/strong\u003e 2WD\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eTraction Drive (System):\u003c\/strong\u003e Hydraulic piston pump, closed loop system. 2WD Parallel Hydrostatic or optional 3WD Series Parallel piston pump closed loop system. Foot pedal forward and reverse; infinitely variable.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eTransport Width:\u003c\/strong\u003e Outside at Tires: 60″ (152.4 cm)\u003c\/p\u003e \u003cp\u003eOutside at Reels: 69.7″ (177 cm)\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 1,087 lbs. (493 kg)\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWheelbase:\u003c\/strong\u003e 47″ (119 cm)\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWidth of Cut:\u003c\/strong\u003e 59″ (150 cm)\u003c\/p\u003e","brand":"MK store","offers":[{"title":"Default Title","offer_id":53832784674927,"sku":null,"price":999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/7943\/7935\/files\/Small_8f60c59e-b658-4fc0-8678-e135b15a3640.jpg?v=1784198767","url":"https:\/\/fillicafetexas.store\/products\/greensmaster-3150-q","provider":"FiLLi Cafe","version":"1.0","type":"link"}