{"product_id":"greensmaster-etriflex-3360","title":"Greensmaster® eTriFlex® 3360","description":"\u003cp\u003eThe Greensmaster® eTriFlex® models carry no hydraulic fluid and utilize all-electric components for traction, steering, lift and cutting. These EnergySmart® models are operationally friendly with noticeable noise reductions, operational cost savings, and other meaningful improvements to complement the ever-important enhancements in cutting performance.Combining the innovative, Double A-Arm Suspension System with industry-leading Flex technology, the cutting units float freely over any terrain. The new Radius Dependent Speed (RDS™) System, in combination with the Lift-In-Turn cutting unit leveling feature virtually eliminates the effect known as “Triplex-Ring”. This substantially improves both the aesthetics and playability of the green.Superior cutting performance is only the beginning. The patented Lift-Gate Footrest, Tool-Free QuickChange™ cutting units, Automatic “Slow-in-Turn” during Transport and Auto-Brake on Operator Dismount are just a few of the many new features that provide added versatility, simplified service, and ultimately, more productivity.= Electric Model\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eArmrests:\u003c\/strong\u003e Optional\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eBattery:\u003c\/strong\u003e 12V\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eBedknife:\u003c\/strong\u003e Replaceable single edged, EdgeMax™ Microcut Bedknife is standard on all cutting units. Aggressiveness stays constant throughout the life of the reel regardless of reel or bedknife wear. Patented design.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eBedknife Adjustment:\u003c\/strong\u003e Dual screw, indexed “click” adjustment to the reel; detents correspond to 0.0007″ (0.018 mm) bedknife movement for each position.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eBlade Style\/Type:\u003c\/strong\u003e Reel\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eBlade Type (Description):\u003c\/strong\u003e Reels are 5″ (13 cm) in diameter, 21″ (53.3 cm) in length. EdgeSeries™ Reels blades are welded to 5 stamped steel spiders, and heat treated. The reel is ground for diameter and concentricity, and relief ground. The reel weldment shaft is a 1.375″ (35 mm) diameter tube with internally splined threaded insert. Two stainless steel ball bearings (30 mm inside diameter) slip fit onto reel shaft retained by internally splined threaded insert. Low drag seals\/slingers for added protection with o-ring sealed motor and counterweight. Reel position maintained by a wave washer with no adjusting nut.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCharger:\u003c\/strong\u003e Off-board high efficiency 1200W smart charger.• AC input voltage 100-240VAC• AC input Frequency 50\/60 Hz• Max input Current 14 A• Max charge time, empty to full: 9 hrs.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eClip Frequency\/Backlapping:\u003c\/strong\u003e Standard, on-board and adjustable speed from 200–520 RPM\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eControls:\u003c\/strong\u003e Traction Pedal: Forward\/Neutral\/Reverse; Joystick: Raise\/Lower; Function control switch: Neutral, Mow, Transport; Key switch; Steering Arm Lock Pedal; Brake pedal; Parking Brake; InfoCenter; Seat Adjusting Lever; Main Power Connectors; Choke; Fuel-Shutoff Valve\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCup Holder:\u003c\/strong\u003e Standard\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCutting Unit Accessories:\u003c\/strong\u003e 8, 11, 14-Blade Cutting Unit, Roller Options, Roller Scrapers \/ Brushes \/ Combs Options, Bedknife and Bedbar Options, Tools and Maintenance Options.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCutting Unit Lift\/Lower:\u003c\/strong\u003e 48V electric linear actuators with fully integrated brushless permanent magnet motor and controller. Fully sealed with splash guard. Center lift actuator drop and raise delay is dependent on machine travel velocity.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCutting Unit Type\/Configuration:\u003c\/strong\u003e Triplex, balanced cutting units with precision die-cast aluminum cross member with two bolt-on die-cast aluminum side plates. Cutting units feature quick disconnect for removal\/installation and are interchangeable to all positions. Double A-Arm Suspension utilizing sealed ball joints allows free cutting unit motion in pitch and yaw. Links system for the roll. The basket is directly mounted to the cutting unit displacing weight evenly over front and rear rollers. (patented)\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDrivetrain:\u003c\/strong\u003e Hybrid\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eElectrical System:\u003c\/strong\u003e 48V System for traction motor circuit, steering motor circuit, cutting unit motor circuit and lift \/ lower actuator circuit. 12V system for primary controls and brake actuator.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eEngine Cooling:\u003c\/strong\u003e Air Cooled\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFuel \/ Power Source:\u003c\/strong\u003e Hybrid\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFuel Capacity:\u003c\/strong\u003e 4.9 U.S. gal. (18.5 L)\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eGauges\/Instrumentation:\u003c\/strong\u003e InfoCenter™: Onboard LCD display shows gauges, alerts\/faults, service reminders, electrical system diagnostics, low oil pressure, alternator, engine hours, engine rpm, voltage, functional control status, parking brake status, reel speed setting, backlap control, clip control, calibration of 48V components, advanced machine diagnostics.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eGrass Distribution:\u003c\/strong\u003e Non-adjustable front shield with adjustable cut-off bar to improve grass discharge from reel in wet conditions.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eGround Clearance:\u003c\/strong\u003e 3.8″ (9.7cm)\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eGround Speed – Forward:\u003c\/strong\u003e 0 – 10 mph (0 – 16 km\/h)\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eGround Speed – Reverse:\u003c\/strong\u003e 0 – 5 mph (0 – 8 km\/h)\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eHeight:\u003c\/strong\u003e 80.8″ (205 cm)\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eHeight of Cut Range:\u003c\/strong\u003e Cutting height is adjusted on front roller by two vertical screws and held by two locking cap screws. Bench HOC range is 0.062″ – 0.297″ (1.6 – 7.5 mm). With high HOC kit, range is 0.297″ – 1.0″ (7.5 – 25.4 mm). Effective HOC may vary depending on turf conditions and roller\/bedknife installed.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eImplement Drive:\u003c\/strong\u003e Three, 48V (1.1 KW), air-cooled brushless permanent magnet reel motors with separable controller.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eLighting:\u003c\/strong\u003e Optional\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eMain Frame\/Chassis:\u003c\/strong\u003e Three tie-down locations (2 side, 1 rear).\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eMowing Speed:\u003c\/strong\u003e 0 – 5 mph (0 – 8 km\/h)\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNumber of Blades:\u003c\/strong\u003e 11, 14, 8\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eOptional Accessories:\u003c\/strong\u003e 3WD Kit, Light Kit, Light Kit – Front Mount Brackets, Rear Light Kit, Seat Kit (Standard or Premium), Left Armrest Kit (Standard), Armrest Kit (Premium), Spark Arrestor Kit (Gas), Canopy, Utility Bag Kit, Wireless Hour Meter, Seat Cover\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eOverall Width:\u003c\/strong\u003e 70.9″ (180 cm)\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eParking\/Service Brakes:\u003c\/strong\u003e Traction motor regenerative braking; foot pedal service\/parking brake, linear-actuated automatic parking brake.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003ePower Steering:\u003c\/strong\u003e Yes\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003ePower Train (Engine Description):\u003c\/strong\u003e Engine: Kawasaki® 14.5 HP (10.8 kW) @3600 rpm, gasoline, air-cooled, twin-cylinder, governed to 2400 rpm, displacement 36.8 cu-inch (603cc). Choke standard.\u003c\/p\u003e \u003cp\u003eGenerator: 48V 5400W air cooled brushless permanent magnet motor in parallel with four 12V 33AH AGM batteries (connected in series). Generator is used to start engine.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eProduct Length:\u003c\/strong\u003e 98″ (249 cm) with baskets\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eRDS™ System:\u003c\/strong\u003e Radius Dependent Speeds – Clip Rate: Maintains consistent cutting unit clip rate in turns on each individual reel (patent-pending). Wheel Speed Control: Individual wheel speed control during turns (patent-pending). Lift-In-Turn: Provides level cut from side to side of cutting units regardless of turning angle (patented).\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReel Diameter:\u003c\/strong\u003e 5 in. (12.7cm)\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReel\/Cylinder Drive:\u003c\/strong\u003e Electric\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eRollers:\u003c\/strong\u003e Front: Not included with cutting unit, purchased separately. Option between full, narrow-spaced and wide-spaced Wiehle roller.\u003c\/p\u003e \u003cp\u003eRear: Steel full, 2″ (5.1 cm) diameter with sealed bearings and through-shaft.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSafety\/Operator Safety:\u003c\/strong\u003e Sound Power: 91 db(A)\u003c\/p\u003e \u003cp\u003eSound Power at Operator’s Ear: 73 db(A)\u003c\/p\u003e \u003cp\u003eSound Power to Bystander: 25 ft – 78 db(A), 50 ft – 73 db(A), 100 ft – 66 db(A)\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSteering System Description:\u003c\/strong\u003e 48V electric steering motor with torque feedback device. Selective slow down feature for turning in mowing mode. Automatic slow down at high transport speeds when turning.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eTires – Front:\u003c\/strong\u003e 19″ x 10.5″ – 8″, 4-ply, Smooth Tread\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eTires – Rear:\u003c\/strong\u003e 19″ x 10.5″ – 8″, 4-ply, Smooth Tread\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eTraction Drive:\u003c\/strong\u003e 2WD\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eTraction Drive (System):\u003c\/strong\u003e Positive 2WD traction drive: Two, brushless permanent magnet traction motors coupled to a gearbox. Optional 3WD. (patent-pending).\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eTurning Circle (Diameter):\u003c\/strong\u003e 69.8″ (182 cm) clearance to cutting unit motor\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e Mow: 1,354 lbs (614 kg) (with 11-blade cutting unit, baskets, standard seat \u0026amp; no fuel)\u003c\/p\u003e \u003cp\u003eTransport: 1,625 lbs (737 kg) (with 11-blade cutting unit, baskets, standard seat \u0026amp; no fuel)\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWheelbase:\u003c\/strong\u003e 49.8″ (126.5 cm)\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWidth of Cut:\u003c\/strong\u003e 59″ (150 cm)\u003c\/p\u003e","brand":"MK store","offers":[{"title":"Default Title","offer_id":53832784937071,"sku":null,"price":999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/7943\/7935\/files\/Small_eef2585a-cfc4-4215-8a88-7ef5c65e5726.jpg?v=1784198774","url":"https:\/\/fillicafetexas.store\/products\/greensmaster-etriflex-3360","provider":"FiLLi Cafe","version":"1.0","type":"link"}