{"product_id":"groundsmaster-4300","title":"Groundsmaster® 4300","description":"\u003cp\u003eThe Groundsmaster® 4300-D has a lightweight footprint and CrossTrax™ 4-wheel drive for superior hill-climbing. Each of its five Contour™ Plus cutting units closely follows contours for an even cut on undulating terrain.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eAir Filter:\u003c\/strong\u003e Dry, replaceable primary and optional safety element.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eArmrests:\u003c\/strong\u003e Standard\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eBattery:\u003c\/strong\u003e 12V\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eBlade Style\/Type:\u003c\/strong\u003e Rotary\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eBlade Type (Description):\u003c\/strong\u003e 22” (55.9 cm) long, 2.5” (6.4 cm) wide, 0.25” (0.64 cm) thick combination blades.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCab Unit:\u003c\/strong\u003e N\/A\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eControls:\u003c\/strong\u003e Single foot-operated traction pedal. Hand-operated key ignition switch, cutting unit raise\/lower switch, cutting unit engage switch, parking brake switch, cruise control switch, and headlight switch all positioned on right hand pivoting control console.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCooling System Description:\u003c\/strong\u003e Rear-mount, cross-flow 7-row radiator with 6.3 fins per inch, 5.5 quart (5.2 liter) capacity.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCup Holder:\u003c\/strong\u003e Standard\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCutting Unit Accessories:\u003c\/strong\u003e Leaf Mulching Kit, Combination Blade, Angle Sail Blade, Atomic Mulching Blade, Rear Roller Scraper Kit, Sectional Rear Roller, 22” Rotary Replacement Cutting Unit\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCutting Unit Lift\/Lower:\u003c\/strong\u003e Joystick control for deck raise and lower.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCutting Unit Type\/Configuration:\u003c\/strong\u003e Five Contour™ Plus 22” (55.9 cm), rear-discharge rotary cutting units with rear roller on each deck. 90” (229 cm), overlap 5” (12.7 cm), overhang 1” (2.5 cm)\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDeck Construction:\u003c\/strong\u003e Cutting chamber is 10-gauge steel constructed chambers with 12-gauge welded reinforcements. Spindle support is 3\/16” (0.48 cm) high-strength steel and 10-gauge exterior channels. Cutting unit frame is welded 1.5” (3.8 cm) square x 0.25” (0.6 cm) wall tube with 7-gauge side supports. Spindle support 3\/16” (0.48 cm) high-strength steel and 10-gauge exterior channels.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDrivetrain:\u003c\/strong\u003e Diesel\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eElectrical System:\u003c\/strong\u003e 12-volt battery with 540 CCA, 55 amp alternator. Overload protection with automotive-type fuses.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eEngine Cooling:\u003c\/strong\u003e Liquid Cooled\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFuel \/ Power Source:\u003c\/strong\u003e Diesel \/ Biodiesel\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFuel Capacity:\u003c\/strong\u003e 13.5 U.S. gal. (51.1 L)\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eGauges\/Instrumentation:\u003c\/strong\u003e InfoCenter™: Onboard LCD display shows gauges, alerts\/faults, service reminders, electrical system diagnostics. Indicates fuel level, coolant temp, low oil pressure, alternator, engine hours, engine rpm, voltage, counterbalance settings, glow indicator, lift\/lower indicator.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eGround Clearance:\u003c\/strong\u003e 5″ (12.7 cm)\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eGround Following:\u003c\/strong\u003e 6” (15.3 cm) anti-scalp cups on each blade.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eGround Speed – Forward:\u003c\/strong\u003e 0 – 10 mph (0 – 16.1 km\/h)\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eGround Speed – Reverse:\u003c\/strong\u003e 0 – 4 mph (0 – 6.4 km\/h)\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eHeight:\u003c\/strong\u003e 86″ (215 cm) with 2-post ROPS\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eHeight of Cut Range:\u003c\/strong\u003e 0.75” – 4” (1.9 cm – 10.2 cm) in 0.25” (0.6 cm) increments.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eHydraulic Cylinders:\u003c\/strong\u003e Two remote spin-on filters: main system, and traction charge.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eHydraulic Fluid Capacity:\u003c\/strong\u003e 14 U.S. gal. (53 L)\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eHydraulic Fluid Type:\u003c\/strong\u003e Toro PX™ Extended Life Hydraulic Fluid\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eImplement Drive:\u003c\/strong\u003e Hydraulic, direct coupled to spindle.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIntelliDash™ Capable:\u003c\/strong\u003e No\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eInterlocks:\u003c\/strong\u003e Prevents engine from starting unless traction pedal is in neutral and deck is disengaged. If operator leaves seat with deck engaged, decks stop. If operator leaves the seat with the unit out of neutral, engine stops. Mowing only permitted in low range. Engine stops if parking brake engaged and traction pedal not in neutral.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eLighting:\u003c\/strong\u003e Standard\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eMain Frame\/Chassis:\u003c\/strong\u003e All welded formed-steel frame with integral tie-down anchors.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eMax Slope Angle:\u003c\/strong\u003e Refer to operator’s manual.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eMowing Rate (Productivity):\u003c\/strong\u003e Up to 6.4 acres\/hr (2.6 hectacres\/hr)\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eMowing Speed:\u003c\/strong\u003e 0 – 7 mph (0 – 11.3 km\/h)\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNumber of Blades:\u003c\/strong\u003e 5\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eOil Capacity:\u003c\/strong\u003e 5.5 U.S. qt. (5.2 L)\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eOil Cooler Description:\u003c\/strong\u003e Double row, single-pass oil cooler that tilts out for cleaning.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eOptional Accessories:\u003c\/strong\u003e Air-ride Seat Suspension, Two-post ROPS Extension System, White Sunshade, Red Sunshade, Operator Fan Kit, Diagnostic Display Box, Golf Ball Operator Guard\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eOverall Width:\u003c\/strong\u003e 96.3″ (245 cm) (outside of decks)\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eParking\/Service Brakes:\u003c\/strong\u003e 8” mechanical drum-type front wheel brakes. Brakes may be actuated for service braking via left foot pedal. Integrated foot pedal lock provides parking brake. Dynamic braking through hydrostatic traction drive system.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003ePower Steering:\u003c\/strong\u003e Yes\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003ePower Train (Engine Description):\u003c\/strong\u003e Yanmar® 3-cylinder, liquid-cooled, turbo-charged diesel, 43.4 hp (32.4 kW), 88.5 ft.-lbs. of torque, 91.4 cu. in. (1.5 liter) displacement. EPA Tier IV Final and Stage V compliant.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eProduct Length:\u003c\/strong\u003e 126″ (320 cm)\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eRollers:\u003c\/strong\u003e Per deck: Two 5” (12.7 cm) diameter front rollers with sealed stainless steel bearings, one 3” (7.6 cm) diameter rear roller with greaseable stainless steel bearings.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSafety\/Operator Safety:\u003c\/strong\u003e 2-post ROPS and seat belt standard.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSeat:\u003c\/strong\u003e Mechanical suspension seat standard with pivoting LH armrest, pivoting RH control arm and retractable seat belt.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSpindle Assembly:\u003c\/strong\u003e Ductile cast iron spindle housing. Dual greaseable tapered roller bearings. 1.25” (3.2 cm) diameter solid cold finished steel spindle shaft. Splined connection between spindle shaft and pulley. Welded blade retainer plus anti-scalp cups.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eStarting:\u003c\/strong\u003e Key Start\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSteering System Description:\u003c\/strong\u003e Rear wheel, power steering with an independent hydraulic pump circuit.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eTires – Front:\u003c\/strong\u003e 26.5″ x 14″ – 12″, 6-ply\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eTires – Rear:\u003c\/strong\u003e 20″ x 12″ – 10″, 6-ply\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eTool Box:\u003c\/strong\u003e Standard\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eTraction Drive:\u003c\/strong\u003e 4WD\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eTraction Drive (System):\u003c\/strong\u003e Front drive wheels powered by a hydrostatic pump with individual wheel motors. Parallel \/ Series Hydrostatic, closed loop 4 wheel drive, forward direction only. Variable displacement piston pump with direct displacement control, Standard all-wheel drive with CrossTrax® All-Wheel Drive system, which transfers power from the front wheels to the opposite rear wheels via independent rear wheel motors.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eTransport Width:\u003c\/strong\u003e 88.3″ (224 cm) (outside of front tires), front track width the same. Rear track width: 54″ (137 cm)\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e Traction Unit Weight: 3,205 lbs (1454 kg) – with full fluids and 5 cutting units.\u003c\/p\u003e \u003cp\u003eCutting Unit Weight: 140 lbs (64 kg) – single cutting unit assembly only.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWheelbase:\u003c\/strong\u003e 60″ (152.4 cm)\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWidth of Cut:\u003c\/strong\u003e 90” (229 cm)\u003c\/p\u003e","brand":"MK store","offers":[{"title":"Default Title","offer_id":53832766423151,"sku":null,"price":999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0736\/7943\/7935\/files\/Small_d15b871a-bb19-4d9f-ab6f-e52668c98ad9.jpg?v=1784197817","url":"https:\/\/fillicafetexas.store\/products\/groundsmaster-4300","provider":"FiLLi Cafe","version":"1.0","type":"link"}